NEC uPD78P078 - Manual (Page 501)

501
CHAPTER 22 INTERRUPT FUNCTIONS
Table 22-1. Interrupt Source List (2/2)
Interrupt Source
Name Trigger
Reference time interval signal from
watch timer
Generation of 16-bit timer register,
capture/compare register (CR00)
match signal
Generation of 16-bit timer register,
capture/compare register (CR01)
match signal
Generation of 8-bit timer/event
counter 1 match signal
Generation of 8 bit timer/event
counter 2 match signal
18 INTAD End of A/D converter conversion 0028H
Generation of 8-bit timer/event
counter 5 match signal
Generation of 8-bit timer/event
counter 6 match signal
Software — BRK BRK instruction execution — 003EH (E)
Vector
Table
Address
14 INTTM00 0020H
15 INTTM01 0022H
Maskable 16 INTTM1 Internal 0024H (B)
17 INTTM2 0026H
19 INTTM5 002AH
20 INTTM6 002CH
Notes 1. Default priorities are intended for two or more simultaneously generated maskable interrupt requests.
0 is the highest priority and 20 is the lowest priority.
2. Basic configuration types (A) to (E) correspond to (A) to (E) of Figure 22-1.
13 INTTM3 001EH
Default
Priority Note 1
Interrupt
Type
Internal/
External
Basic
Configuration
Type Note 2