NEC uPD78P078 - Manual (Page 606)

606
APPENDIX B DEVELOPMENT TOOLS
B.3.1 Hardware (2/2)
(2) When using in-circuit emulator IE-78001-R-A
IE-78001-R-A Note
In-circuit Emulator
IE-70000-98-IF-B or IE-70000-98-
IF-C Note
Interface Adapter
IE-70000-PC-IF-B or IE-70000-PC-
IF-C Note
Interface adapter
IE-78000-R-SV3
Interface Adapter
IE-78078-NS-EM1 Note
Emulation Board
IE-78K0-R-EX1 Note
Emulation Probe Conversion
Board
IE-78078-R-EM
Emulation board
EP-78064GC-R
Emulation Probe
TGC-100SDW
Conversion Adapter
(refer to Figure B-2)
EP-78064GF-R
Emulation Probe
EV-9200GF-100
Conversion Socket
(refer to Figure B-3)
An in-circuit emulator to debug hardware and software when developing
application systems that use the 78K/0 Series. Supports integrated
debugger (ID78K0). Used in combination with an interface adapter to
connect to an emulation probe and the host machine.
An adapter required for using a PC-9800 series (except notebook-type
personal computer) as the host machine for the IE-78001-R-A.
An adapter required for using an IBM PC/AT or compatible as the host
machine for the IE-78001-R-A.
An adapter and a cable required for using EWS as the host machine for
the IE-78001-R-A. Used connected to the board in the IE-78001-R-A.
Supports 10Base-5 for Ethernet TM . A separately available adapter required
for other systems.
A board to emulate peripheral hardware peculiar to the device. Used in
combination with an in-circuit emulator and emulation probe conversion
board.
A board required for using the IE-78078-NS-EM1 with the IE-78001-R-A
A board to emulate peripheral hardware peculiar to the device (supports
3.0 to 5.5 V). Used in combination with the IE-78001-R-A.
A probe to connect an in-circuit emulator and the target system.
For 100-pin plastic QFP (GC-7EA, GC-8EU type).
A conversion adapter to connect the board of a target system designed
to mount 100-pin plastic QFP (GC-7EA, GC-8EU type) and the EP-
78064GC-R.
The
µ
PD78P078KL-T or 78P078YKL-T (ceramic WQFN) can be mounted
instead of connecting the EP-78064GC-R.
A probe to connect an in-circuit emulator and the target system.
For 100-pin plastic QFP (GF-3BA type).
A conversion socket to connect the board of a target system designed to
mount 100-pin plastic QFP (GF-3BA type) to the EP-78064GF-R.
Note Under development
Remarks 1. The TGK-100SDW is a product of TOKYO ELETECH Corporation.
Contact: Daimaru Kogyo Co., Ltd.
Tokyo Electronic Component Department (Tel: (03)3820-7112)
Osaka Electronic Component Department (Tel: (06)244-6672)
2. The TGC-100SDW is sold singly.
3. The EV-9200GF-100 is sold in a set of five.