Ricoh Aficio 340 - Manual (Page 13)

MULTI-ACCESS
ä
1
✩…means that these functions can be used together.
❍…means that you can interrupt the current job with Function keys or the
{ In-
terrupt } key to proceed to a subsequent job.
→
…means that another job will automatically start after the current job is fin-
ished.
×
…means that you will manually start another job after the current job is fin-
ished (i.e. these functions cannot be used together).
*1 Simultaneous operations are only available when copies are being made after their
originals are all scanned.
*2 You might fail to print received data, depending on size or orientation of the original.
*3 Priority is given to the subsequent job; after the subsequent job is finished, the inter-
rupted operation is automatically resumed.
*4 If the optional copier hard disk is installed, you can make interrupt copies with the
{ Interrupt } key.
*5 If you are making stapling copies on paper larger than A4, 8 1 /
2
"
×
11" with the op-
tional 1000-sheet finisher, the subsequent operation is disabled until the current job
is finished. After you start interrupt copying with the { Interrupt } key, the Output Tray
is automatically changed to “Internal Tray”.
*6 During parallel receptions, any subsequent job is disabled until the receptions are
completed.