Changing the user parameters, P.203 “changing the user, Parameters – Ricoh Aficio 340 User Manual
Page 459: P.203 “changing the user param, Eters, P.203
KEY OPERATOR SETTINGS
203
7
Changing the User Parameters
The User Parameters allow you to customize various settings to match your
needs.
To change the function settings, set the user parameter switches.
Preparation
Access to some User Parameter Settings requires installation of optional
equipment or that other settings be made beforehand.
-
-
-
-Switches and Bits
User Parameters are divided into Switches and each switch is divided into eight
bits. The right most bit is bit 0 and the left most is bit 7.
-
-
-
-User Parameter List
Switch
00
0
1
0
0
0
0
0
0
↓
↓
↓
↓
↓
↓
↓
↓
7
6
5
4
3
2
1
0
Switch
Bit
Item
0
1
00
0
Stamp home position
Off
On
3,2,1
Image density adjustment level home position
The higher the level, the greater the image density.
000: Auto Image Density, 001: Level 1 (lightest), 010: Level 2, 011:
Level 3, 100: Level 4, 101: Level 5 (darkest)
5,4
Character size (resolution) home position
00: Standard, 01: Detail, 10: Super fine
6
Transmission Mode home
position
Memory Trans-
mission
Immediate
Transmission