Ricoh Aficio 340 - Manual (Page 412)

FACSIMILE USER TOOLS
156
7
H
Select a size you want to register
using the
< < < < or > > > > key and press
[OK] .
The specified size is shown on the
display.
Note
❒ When you select “ [Auto] ”, “---”
is shown on the display.
I
Press [Horiz.] .
J
Enter a length using the number
keys and press
[OK] .
The specified size is shown on the
display.
Note
❒ Each time you press [mm
↔ ↔ ↔ ↔
inch] , the units change between
“inch” and “mm” alternately. If
you enter a length and change
the unit by pressing
[mm
↔ ↔ ↔ ↔
inch] , the length is converted au-
tomatically according to the
unit (fractions are rounded off).
For example, when you enter
{{{{
2
}}}}, {{{{
5
}}}}, and {{{{
0
}}}} in millimeters
and change to “inch,” the length
“9.8 inch” is shown on the dis-
play. If you press “mm” again
“249 mm” is displayed.
K
Press [OK] .
The display shown in 6 appears
again.
L
Press the
{{{{
User Tools/Counter
}}}} key.
Deleting an Irregular Area
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{{{{
Fax
}}}} key.
ND1X03E0
ND1X02E8
ND1X03E0