Ricoh Aficio 340 - Manual (Page 298)

SENDING A FAX MESSAGE
42
2
- - - -Auto Identification
This feature used when G4 is selected.
The machine first tries a G4 commu-
nication and if it cannot connect be-
cause the receiver is not a G4
terminal, it automatically switches to
G3 and redials.
Note
❒ If the G3 line at the destination is
connected to the ISDN via a TA
(Terminal adapter) or a PBX, since
the called number is on ISDN, it is
regarded as G4 and the Auto Iden-
tification feature may not automat-
ically switch this machine to G3.