Ricoh Aficio 340 - Manual (Page 429)

KEY OPERATOR SETTINGS
173
7
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{{{{
Fax
}}}} key.
B
Press the
{{{{
User Tools/Counter
}}}} key.
C
Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Key Op. Settings” using the
number keys and press the
{{{{
#
}}}}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
E
Enter the function number for
“Memory Lock” using the num-
ber keys.
F
Switch Memory Lock on or off us-
ing the
< < < < and > > > > keys and press
OK.
Note
❒ If you press Cancel, Memory
Lock is not switched on and the
display shown in 5 appears
again.
G
Press [PrevMenu] .
H
Press the
{{{{
User Tools/Counter
}}}} key.
Multistep Transfer
The optional Fax Feature Expander is re-
quired to use this function.
This machine can be used to build up
a multi-step facsimile network that al-
lows messages to be sent via multiple
Transfer Stations and achieve greater
efficiency in processing Transfer Re-
quests.
The following procedure describes
how to program a Transfer Station
number into a Group. Providing this
Group contains the appropriate End
Receiver Information (Group codes),
2
2
2
2
1 1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Aut o Reduce/
Book 2-Sided
ND2L01E0
ND1X03E0