Ricoh Aficio 340 - Manual (Page 338)

ADVANCED TRANSMISSION FEATURES
82
4
2-SIDED TRANSMISSION (DOUBLE-SIDED
TRANSMISSION)
Use this feature to send 2-sided origi-
nals from the Document Feeder
(ADF). Both sides of an original will
be scanned. The front and back of the
scanned original will be printed in or-
der, on separate sheets at the other
end. Note that the orientation of alter-
nate sheets may be reversed at the
other end.
Limitation
❒ The front and back of a 2-sided
document are scanned in different
directions. This means that when
the front and back sheets of each
page are printed at the other end,
they may be upside-down in rela-
tion to each other.
Note
❒ If the first page is a single-sided
cover sheet, you can choose to
have this page sent using single-
sided transmission. The remaining
pages will be sent using Duplex.
❒ You can confirm whether both
sides were properly scanned in
with the Stamp feature
⇒
P.52
“Stamp” .
A
Set your original in the Document
Feeder (ADF) and select any scan
settings you require.
B
Press [Mode] .
The Transmission Mode menu ap-
pears.
C
Enter the “2-Sided TX” function
number with the number keys.
D
Press the
< < < < or > > > > key to select the
first page that you want to be
scanned on both sides.
Note
❒ If your document contains the
single-sided cover letter as the
first page, select From 2nd
sheet, so that the machine scan
both sides from the second
page.
E
Press [OK] .
ND1X02E9