Ricoh Aficio 340 - Manual (Page 301)

DIALING
45
2
Tone
This feature allows a machine con-
nected to a pulse dialing line to send
tonal signals (for example if you want
to use a special service on a tone dial-
ing line). When you press the
{{{{
Tone
}}}}
key, the machine dials the number us-
ing tonal signals.
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the
{{{{
Tone
}}}} key.
Note
❒ A tone is shown as a “ • ” on the
display.
- - - -Sending Tonal Signals by ISDN
(ISDN Option Required)
You can still send tone signals to a G3
user even if the machine is only con-
nected to an ISDN line.
Note
❒ This feature can only be used for
Memory or Immediate Transmis-
sion. You cannot dial through
ISDN using On-hook Dial or Man-
ual Dial.
Subaddress (ISDN option required)
ISDN allows two or more terminals
(such as a facsimile and digital tele-
phone) to be connected to a single
line. These terminals are identified by
their subaddress numbers. If the ter-
minals connected to the line at a des-
tination are assigned subaddresses,
dialing a subaddress allows you to di-
rect your fax message to a particular
terminal at the destination.
Limitation
❒ Subaddress can only be used with
ISDN.
Note
❒ You need to program a User Func-
tion key with the subaddress func-
tion.
⇒
P.164 “ASSIGNING USER
FUNCTION KEYS”
❒ You can program a subaddress
number in a Quick Dial or Speed
Dial.
❒ If you want to assign a subaddress
to your fax machine, contact your
service representative.
A
Set your original and select any
scan settings you require.
B
Select either G4 or G3 (ISDN).
C
Dial the fax number with the
number keys.
D
Press the User Function key
(
{{{{
F1
}}}}-{{{{
F5
}}}}) where the subaddress
function has been registered.
“/” will appear on the display.
E
Enter the destination subaddress
with the number keys.
F
Press the
{{{{
Start
}}}} key.
ND2L04E3
TX File
Status
01 02 03 04 05 06
F1 F2 F3 F4 F5
De
Su
nicating File File
Start
Manual RX TEL
Mode