Ricoh Aficio 340 - Manual (Page 354)

ADVANCED TRANSMISSION FEATURES
98
4
The following display is shown.
Note
❒ The numbers of Transfer Sta-
tions and End Receivers are dis-
played.
I
Press the
{{{{
Start
}}}} key.
Specifying an End Receiver
When you make a Transfer Request,
you must specify the final destina-
tions (End Receivers) for your mes-
sage.
You cannot enter the numbers of the
End Receivers directly. Instead, enter
a simple code that describes where
the numbers are stored in the Trans-
fer Station (in Quick Dials, Speed Di-
als or Groups).
The numbers must first have been
stored in Quick Dials, Speed Dials or
Groups in the Transfer Station(s).
❖ ❖ ❖ ❖ Quick Dial
Enter
{{{{q }}}} followed by the num-
ber (2 digits) of the Quick Dial
where the End Receiver is stored.
For example, to choose the number
stored in Quick Dial 01 in the
Transfer Station, enter:
{{{{q }}}} {{{{
0
}}}}
{{{{
1
}}}}
❖ ❖ ❖ ❖ Speed Dial
Enter
{{{{q }}}}, {{{{p}}}} followed by the
Speed Dial code (2 or 3 digits).
For example, to choose the number
stored in Speed Dial 12 in the
Transfer Station, enter:
{{{{q }}}} {{{{p}}}}
{{{{
1
}}}} {{{{
2
}}}}
❖ ❖ ❖ ❖ Group Dial
Enter
{{{{q }}}} , {{{{p}}}}, {{{{p}}}} followed
by the Group number (2 digits).
For example, to choose the number
stored in Group 04 in the Transfer
Station, enter:
{{{{q }}}} {{{{p}}}} {{{{p}}}} {{{{
0
}}}}{{{{
4
}}}}