Ricoh Aficio 340 - Manual (Page 434)

FACSIMILE USER TOOLS
178
7
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Key Op. Settings” using the
number keys and press the
{{{{
#
}}}}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
E
Enter the function number for
“Forwarding” using the number
keys.
F
Enter the function number for
“Delete Receiver” using the num-
ber keys.
G
Choose the receiver (Forwarding
Station) to delete by entering its
code number.
Note
❒ If you make a mistake, press
[No] and enter a correct number.
H
Press Yes.
Note
❒ If you press No, the Forwarding
Station is not deleted and the
display shown in 5 appears
again.
I
Press [Yes] .
The Forwarding Station is deleted.
Note
❒ When you press [No] , the For-
warding Station is not deleted
and the display shown in 5 ap-
pears again.
J
Press [PrevMenu] 3 times.
K
Press the
{{{{
User Tools/Counter
}}}} key.
Registering Specific Senders
(Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{{{{
Fax
}}}} key.
ND2C0104
ND1X03E0