IAI America IA-T-XD User Manual
Page 108
Advertising
14. Parameter Edit
100
To write the data to Flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
During Flash ROM writing, “Please Wait....” blinks.
6C B @<< @D @ @@
0B8 D
After writing the data to Flash ROM, the screen
changes to the software reset screen.
To have a valid changed parameter, execute a
software reset. Press the F1 (Yes) key.
During software reset, “Please wait...” blinks.
When the software reset is complete, it returns to the
mode selection screen.
Advertising
This manual is related to the following products: