IAI America IA-T-XD - Manual (Page 38)

9. Simple Operation Procedure
30
@B@

@B@
/



Press the F1 key (Mdi).
The above is the display of a 2 axis
controller. Nothing displays in the 3rd
and 4th axes data location.
@B@
6@
3
@

The cursor is placed at position No.
If there is no data, x.xxx will be displayed. Press
the return key and place the cursor at first axis
position data.
* If the data is already input , write over (original
data is gone) or use the PAGE UP · PAGE
DOWN keys to be placed at x.xxx and then input
the data.
Clear all axis input data by pressing the F1 (Clr)
key twice. You can clear the controller data with
(Clr) key even if the WRT key is not pressed.
When input the 5th and 6th axes data, press the
F4 (Axis) key to switch the display to the 5th and
6th axes data display screen.
(The F4 (Axis) key is used to switch the 1st to 4th
axes display screen to the 5th and 6th axes
display screen.)
Position No.
Axis No. displayed
First axis data
Second axis data
Third axis data Fourth axis data