IAI America IA-T-XD User Manual
Page 139
*Supplement
130
Supplement
Press the F1 (RAbs) key to return to the absolute
reset mode.
㽳
Execute an absolute reset for the master axis according to the screen steps.
Input the axis No. of the mater axis and press the
return key.
Press the F1 (OK) key.
Press the F1 (OK) key.
Press the F1 (OK) key.
Press the F1 (OK) key.
Execute homing.
Press the F1 (OK) key.
131
Supplement
Press the PAGE UP key to advance the screen,
without pressing the F1 (OK) key.
Press the F1 (OK) key.
㽴
Execute the “encoder multi-rotation data reset 1” for the slave axis again.
Input the axis No. of the slave axis again and press
the return key.
Press the F1 (OK) key.
Press the F1 (OK) key.
Exit from the absolute reset mode with the ESC key,
without pressing the F1 (OK) key.
Restart the controller.
Press the F1 (Yes) key.