IAI America IA-T-XD - Manual (Page 137)

*Supplement
128
Supplement
Input 0 with the 10 keys and press the return key.
Press the ESC key several times to move to the Flash ROM writing screen.
Write the data to Flash ROM.
Press the F1 (Yes) key.
Execute restart (software reset).
Press the F1 (Yes) key.
(3) Execute an absolute reset according to the following special procedure (forced operation by
ignoring the screen steps):
Mode Transition:
㽲
Execute the “encoder multi-rotation data reset 1“ for the slave axis.
Input the axis No. of the slave axis and press the
return key.
Press the F1 (OK) key.
Press the F1 (OK) key.
129
Supplement
Exit from the absolute reset mode temporarily with
the ESC key, without pressing the F1 (OK) key.