IAI America IA-T-XD - Manual (Page 53)

9. Simple Operation Procedure
44
Press the ESC key.
To write the data to Flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
During Flash ROM writing, “Please Wait....” blinks.

6C
B
@<<

@D
@

@@


0B
8 
D

Flash ROM writing is complete.
Return to the edit screen with the ESC key.
45
*%
.
,@

@?

Change the program you made in the previous section (9-2).
Insert and delete the program step to allow the same action to be repeated.
Change
Insert “TAG 1” into step No.3, delete the line which displays “MOVL 6,” and write over “GOTO 1”
replacing it with “EXIT.”
Select the F1 key (Edit) on the mode selection
screen.
Press the F2 key (Prog) on the program mode
screen.