IAI America IA-T-XD - Manual (Page 51)

9. Simple Operation Procedure
42
Input 1 on position No. and press the return key.
Transmit the data to the controller by pressing the
WRT key.
The cursor moves to step No.4.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
Input MOVL 2 ~ MOVL 6 program data into steps
No. 4~8 by the same procedure and transmit the
data to the controller.
Display EXIT in the function key area by using the 8
and SF keys.
Select the F2 key (EXIT) and press the return key.
43
Transmit the data to the controller by pressing the
WRT key.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
Finish editing the program and write the data to
Flash ROM.
Press the ESC key.
(The cursor moves to the step No.)
Press the ESC key.
(The cursor moves to the program No.)
Press the ESC key.
Return to the program edit screen.
Press the ESC key.
Return to the edit screen.