IAI America IA-T-XD - Manual (Page 125)

16. Controller
116
#(%
@<D
8B
Executes software reset of the controller. The data which is not written to Flash ROM will be
cleared.
Select the F2 (SRst) key on the controller item screen.
Mode Transition:
To execute a software reset, press the F1 (Yes) key.
If not, press the F2 (No) key. The screen returns to
the mode selection screen.
#(&
@
8B

Executes error reset of the controller. Reset the message-level and action-release-level errors. If
the cause of the error is not solved, the error will reoccur again.
Select the F3 (ERst) key on the controller item screen.
Mode Transition:
To execute an error reset, press the F1 (Yes) key.
If not, press the F2 (No) key.
The screen returns to the controller item screen.
117
#('
?@F
.

Zero clears the global variable.
Select the F4(MClr) key on the controller item screen.
Mode Transition:
Press the F1 (Gvar) key.
To clear memory, press the F1 (Yes) key.
If not, press the F2 (No) key. The screen returns to
the previous screen.
Returns to the previous screen with the ESC key.
#((
8.@@

Re-connect to the controller. In a communicable state, the off-line mode can be moved to the
on-line mode.
Select the F1(Cnct) key on the controller item screen.
Mode Transition:
To re-connect, press the F1 (Yes) key.
If not, press the F2 (No) key. It will return to the
previous screen.
During re-connection, “Please wait...” blinks.
After a re-connection completes, it returns to the
mode selection screen.