General information, About the pid modules, Quantity of applicable pid modules – IDEC MicroSmart Pentra User Manual

Page 10: Eneral, Nformation, About the pid modules -1, Quantity of applicable pid modules -1

Advertising
background image

G

ENERAL

I

NFORMATION

FC5A MicroSmart PID Module User’s Manual FC9Y-B1283

1-1

1: G

ENERAL

I

NFORMATION

This chapter describes general information and specifications of the FC5A series PID modules. Make effective

use of the PID modules after reading and understanding thoroughly functions and characteristics.

About the PID Modules

The PID module performs control actions to eliminate the deviation between the set point (SP) and process

variable (PV). The PID module, which is an expansion module, is required to connect to the FC5A series CPU

for use. Depending on the difference of output specifications, the PID modules are categorized into two types,

and can be used by connecting to a FC5A slim type CPU, or 24-I/O all-in-one type CPU (except 12V DC CPU).

The input channel can accept voltage, current, thermocouple or resistance thermometer signals. The output

channel generates relay output, non-contact voltage (for SSR drive), or current signals.

To configure the PID modules, the Expansion Modules Configuration dialog box in WindLDR is used.

The following table shows the PID module type numbers.

PID Module Type Numbers

Module Type

I/O Points

I/O Signal

Type No.

Relay Output

2 inputs

Thermocouple [K, J, R, S, B, E, T, N, PL- II, C (W/Re5-26)]

Resistance thermometer (Pt100, JPt100)

Voltage (0 to 1V DC, 0 to 5V DC, 1 to 5V DC, 0 to 10V DC)

Current (0 to 20mA DC, 4 to 20mA DC)

FC5A-F2MR2

2 outputs

Relay contact

Non-Contact Voltage

(for SSR drive)/

Current Output

2 inputs

Thermocouple [K, J, R, S, B, E, T, N, PL- II, C (W/Re5-26)]

Resistance thermometer (Pt100, JPt100)

Voltage (0 to 1V DC, 0 to 5V DC, 1 to 5V DC, 0 to 10V DC)

Current (0 to 20mA DC, 4 to 20mA DC)

FC5A-F2M2

2 outputs

Non-contact voltage(for SSR drive)/Current


Quantity of Applicable PID modules

The maximum number of PID modules that can be connected to the MicroSmart CPU differs depending on the

CPU type. The following table shows the maximum number of the PID modules.

Type

All-in-One Type

Slim Type

FC5A MicroSmart CPU

FC5A-C10R2

FC5A-C10R2C

FC5A-C10R2D

FC5A-C16R2

FC5A-C16R2C

FC5A-C16R2D

FC5A-C24R2D

FC5A-C24R2

FC5A-C24R2C

FC5A-D16RK1
FC5A-D16RS1
FC5A-D32K3
FC5A-D32S3
FC5A-D12K1E
FC5A-D12S1E

Number of PID Modules

4

7

Advertising