IDEC MicroSmart Pentra - Manual (Page 117)

C ONFIGURING PID M ODULE USING W IND LDR
6-52 FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
Monitoring PID Module
The PID Module status can be monitored on the monitoring screen. Click on Monitor tab in the PID Module
Configuration dialog box to open the monitoring screen
Monitoring Screen
To start monitoring the PID module, click on Monitor button in the PID Module Configuration dialog box.
(1) CH0/CH1 SP (Set Point)
The set point (SP) of CH0 or CH1 is indicated. During the monitoring, set point (SP) of CH0 or CH1 can be
changed.
(2) CH0/CH1 PV (Process Variable)
The process variable (PV) of CH0 or CH1 is indicated.
(3) CH0/CH1 MV (Output Manipulated Variable)
The output manipulated variable (MV) of CH0 or CH1 is indicated. The bar graph on the right is also updated
according to the output manipulated variable (MV). While the output is on, the OUT indicator turns green.
While CH0 or CH1 is in manual mode, output manipulated variable can be changed.
(4) CH0/CH1 Step
The current step number (0 to 9) is indicated when CH0 or CH1 is in program control mode.
(5) CH0/CH1 Repeat
The remaining repeat number is indicated when CH0 or CH1 is in program control mode.
(6) CH0/CH1 Time
The remaining time in the current step is indicated when CH0 or CH1 is in program control mode.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)
(2)
(1)
(3)
(4)
(9)
(8)
(5)
(6)
(9)
(10)
(7)