IDEC MicroSmart Pentra - Manual (Page 3)

ii FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
• Use an EU-approved circuit breaker. This is required when equipment containing the MicroSmart is destined for
Europe.
• Make sure of safety before starting and stopping the MicroSmart or when operating the MicroSmart to force
outputs on or off. Incorrect operation on the MicroSmart may cause machine damage or accidents.
• If relays or transistors in the MicroSmart output modules should fail, outputs may remain on or off. For output signals
which may cause serious accidents, provide a monitor circuit outside the MicroSmart.
• Do not connect the ground wire directly to the MicroSmart. Connect a protective ground to the cabinet containing
the MicroSmart using an M4 or larger screw. This is required when equipment containing the MicroSmart is
destined for Europe.
• Do not disassemble, repair, or modify the MicroSmart modules.
• When disposing of the MicroSmart, do so as an industrial waste.