IDEC MicroSmart Pentra - Manual (Page 131)

A PPLICATION E XAMPLES
7-10 FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
Parameter Configuration Procedure
1. Expansion Modules Configuration
Select Configuration > Expansion Modules from the WindLDR menu bar to open the Expansion
Modules Configuration dialog box.
In the Expansion Modules Configuration dialog, configure the quantity of modules, slot number, module
type number, control register (data register) and control relay (internal relay). Click on Configure
Parameters button to open the PID Module Configuration dialog box.
Expansion Modules Configuration Dialog Box
Item Setting
(1) Quantity of Modules 1
(2) Slot No. Slot 1
(3) Module Type No. FC5A-F2MR2
(4) Data Register D1000
(5) Internal Relay M1000
2. I/O Function Selection
Select I/O function for each channel in the PID Module Configuration dialog box.
PID Module Configuration Dialog Box (I/O Function Selection)
Item Setting
(1) Input CH0 Function Input CH0
(2) Input CH1 Function Input CH1
(3) Output CH0 Function Output CH0
(4) Output CH1 Function Output CH1
(1)
(2)
(3)
(4)
(5)
(1)
(2)
(3)
(4)