IDEC MicroSmart Pentra - Manual (Page 138)

A PPLICATION E XAMPLES
FC5A MicroSmart PID Module User’s Manual FC9Y-B1283 7-17
2. I/O Function Selection
Select I/O function for each channel in the PID Module Configuration dialog box.
PID Module Configuration Dialog Box (I/O Function Selection)
Item Setting
(1) Input CH0 Function Input CH0
(2) Input CH1 Function Input CH1
(3) Output CH0 Function Output CH0
(4) Output CH1 Function Output CH1
3. Input CH0 Parameters
Configure the Input CH0 parameters in the PID Module Configuration dialog box. To open Input CH0
Parameters in the PID Module Configuration dialog box, click on Input Parameters (CH0) button or
Input (CH0) tab.
PID Module Configuration Dialog Box (Input CH0 Parameters)
Item Setting
(1) Input Range Type K thermocouple with decimal point, Celsius
(2) Set Point (SP) Upper Limit 400.0°C
(3) Set Point (SP) Lower Limit 0.0°C
(4) Alarm 1 Type Upper/Lower limits alarm with standby
(5) Alarm 1 Value 5.5°C
(5)
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)