IDEC MicroSmart Pentra - Manual (Page 71)

C ONFIGURING PID M ODULE USING W IND LDR
6-6 FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
Expansion Modules Configuration Dialog Box
Settings
Item Description
(1)
Quantity
of
Modules
Configure the quantity of modules to be expanded. The quantity of PID modules can be
connected varies with the CPU module type. A maximum of four PID modules can be
connected to the all-in-one type CPU modules. A maximum of seven PID modules can be
connected to the slim type CPU modules.
(2)
Slot
Number Select a slot number to configure the PID module.
(3)
Module
Type
No.
Select the type number of the PID module to configure.
(4)
Data
Register
Designate the control register for the PID module. Data register can be designated. A
maximum of 590 data registers (minimum 190 data registers) are occupied, including the first
data register designated.
(5)
Internal
Relay
Designate the control relay for the PID module. Internal relay can be designated. A maximum
of 32 internal relays (minimum 8 internal relays) are occupied, including the first internal relay
designated.
Buttons
Button Description
(6) Configure Parameters The PID Module Configuration dialog box is opened.
(7) Copy Parameters To The PID module parameters of the current slot can be copied to another slot.
(8) OK All parameters are saved and the dialog is closed.
(9) Cancel All changes made are discarded and the dialog is closed.
(1)
(2)
(3)
(3)
(4)
(5) (6)
(7)
(8)
(9)