IDEC MicroSmart Pentra - Manual (Page 125)

A PPLICATION E XAMPLES
7-4 FC5A MicroSmart PID Module User’s Manual FC9Y-B1283
4. Control CH0 Parameters
Configure the Control CH0 parameters in the PID Module Configuration dialog box. To open Control
CH0 Parameters in the PID Module Configuration dialog box, click on Control Parameters (CH0)
button or Control (CH0) tab.
PID Module Configuration Dialog Box (Control CH0 Parameters)
Item Setting
(1) Set Point (SP) 200°C
(2) AT Bias 20°C
5. Input CH1 Parameters
Configure the Input CH1 parameters in the PID Module Configuration dialog box. To open Input CH1
Parameters in the PID Module Configuration dialog box, click on Input Parameters (CH1) button or
Input (CH1) tab.
PID Module Configuration Dialog Box (Input CH1 Parameters)
Item Setting
(1) Input Range Type K thermocouple, Celsius
(2) Set Point (SP) Upper Limit 1370°C
(3) Set Point (SP) Lower Limit -200°C
(4) Alarm 1 Type Upper limit alarm
(5) Alarm 1 Value 5°C
(1)
(2)
(3)
(4)
(5)
(1)
(2)