ZOLL X Series Monitor Defibrillator Rev B - Manual (Page 113)

Log Parameters
9650-001358-01 Rev. B ZOLL X Series Configuration Manual 107
Record Additional Waveforms
If enabled, the Record Additional Waveform parameter allows you to specify what additional
waveforms are recorded.
The values for the Record Additional Waveforms parameter are:
Record Pads Imp. Waveform
The Record Pads Imp. Waveform parameter allows you to enable or disable pads impedance
recording.
The values for the Continuous Waveform Recording parameter are:
Possible Values: CO2 Capnogram, IBP and CO2 Capnogram
Default: CO2 Capnogram
Possible Values: Disabled, Enabled
Default: Disabled