Spmet monitoring, Averaging time, Sensitivity – ZOLL X Series Monitor Defibrillator Rev B User Manual
Page 41: Hr/pr tone
SpO2 Parameter Settings
9650-001358-01 Rev. B
ZOLL X Series Configuration Manual
35
SpMet Monitoring
The SpMet Monitoring parameter allows you to enable or disable SpMet monitoring.
The values for the SpMet Monitoring parameter are:
Averaging Time
The Averaging Time parameter allows you to specify the averaging time.
The values for the Averaging Time parameter are:
Sensitivity
The Sensitivity parameter allows you to specify the sensitivity level of the SpO2 monitoring.
The values for the Sensitivity parameter are:
HR/PR Tone
The HR/PR parameter allows you to enable or disable heart rate/pulse rate monitoring.
The values for the HR/PR Tone parameter are:
Possible Values:
On, Off
Default:
Off
Possible Values:
4 seconds, 8 seconds, 16 seconds
Default:
8 seconds
Possible Values:
Normal, Maximum
Default:
Normal
Possible Values:
On, Off
Default:
On