ZOLL X Series Monitor Defibrillator Rev B - Manual (Page 15)

Exporting and Importing Configuration Settings
9650-001358-01 Rev. B ZOLL X Series Configuration Manual 9
Export/Import System Messages
When exporting and importing system and patient information, the X Series unit may display
the following error messages:
System Message Cause/Action
CONFIGURATION FILE NOT
FOUND The configuration file (ZollConfig.xml) was not found
on the USB device. Ensure that the connected USB
device contains the configuration file. If required,
generate a configuration file using the Export
operation.
EXPORT OPERATION FAILED An internal error occurred during the export process.
Try repeating the export operation. If failure occurs
again, try a different USB drive.
IMPORT OPERATION FAILED
INVALID CONFIGURATION FILE If the USB device is not new, retry the export and
then retry the import operation.
If the USB device is new and has not been formatted,
reformat the device by selecting the FAT32 File
System, changing the Allocation unit size to Default,
and choosing the Quick Format option. Retry import
operation.
IMPORT OPERATION FAILED
A RESTORE ALL TO FACTORY
DEFAULTS HAS BEEN
PERFORMED During the import process an unexpected failure
occurred. All system and patient parameters have
been restored to factory defaults. Retry import
operation.
INCOMPATIBLE
CONFIGURATION FILE The device that exported the configuration file is not
compatible with the device that is importing the file.
This is caused by incompatible software releases.
Contact the ZOLL Technical Service Department to
update the earlier software version.
INSUFFICIENT SPACE ON USB
DRIVE The USB device did not have enough space to save
the configuration file. The configuration file requires
at least 1MB of free space.
INVALID USB DRIVE
CONNECTED The USB device connected was not recognized. Try
a different USB device.
NO USB DRIVE INSERTED No USB device was inserted in the side panel. Insert
USB drive and retry.