ZOLL X Series Monitor Defibrillator Rev B - Manual (Page 57)

9650-001358-01 Rev. B ZOLL X Series Configuration Manual 51
Chapter 4
Supervisor Menu
This chapter describes the configuration settings you can modify in the Supervisor menu. The
Supervisor menu allows you to configure default settings such as alarms, NIBP, and
Defib/Pacer. Access to the Supervisor menu is passcode-protected and only users authorized to
view and modify these settings may do so.
Accessing the Supervisor Menu
To access the Supervisor menu, press the More ( ) and Setup ( ) quick access keys, and
select Supervisor. You are then required to enter the four digit Supervisor passcode before
accessing the configurable options in the menus.
The Supervisor menu includes the following parameter settings.
• “Alarms Parameters” on page 52
• “Log Parameters” on page 104
• “Defib/Pacer Parameters” on page 108
• “ECG Parameters” on page 110
• “NIBP Parameters” on page 112
• “Printer Parameters” on page 114
• “Display/Configuration Parameters” on page 116
• “AED/Advisory Parameters” on page 126
• “CPR Parameters” on page 132
• “Communications Parameters” on page 136
• “Service Parameters” on page 138