ZOLL X Series Monitor Defibrillator Rev B - Manual (Page 27)

9650-001358-01 Rev. B ZOLL X Series Configuration Manual 21
Chapter 3
Parameter Menus
This chapter describes the configuration settings you can modify in the Parameter Menus. All
X Series users can access the Parameter menus, which allow you to modify the monitoring
protocols of the unit. The Parameter menus share many of the same settings as the Supervisor
menu. If the shared settings have been configured in the Supervisor menu, they can be modified
in the Parameter menus, but they will default back to the Supervisor settings once the unit is
turned off for two minutes.
Accessing the Parameter Menus
You can access these menus in the monitoring window by pressing the Display/Home button
( ) and then use the navigation keys to highlight and select the appropriate settings in the
menus.
The Parameter menus include the following parameters:
• “HR/PR Parameter Settings” on page 22
• “NIBP Parameter Settings” on page 25
• “Resp Parameter Settings” on page 29
• “SpO2 Parameter Settings” on page 32
• “Temp Parameter Settings” on page 36
• “IBP1 Parameter Settings” on page 39
• “IBP2 Parameter Settings” on page 43
• “IBP3 Parameter Settings” on page 47