Preface, Configuration manual updates – ZOLL X Series Monitor Defibrillator Rev B User Manual
Page 7
9650-001358-01 Rev. B
ZOLL X Series Configuration Manual
1
Preface
The ZOLL
®
X Series
®
Configuration Manual provides information on how to configure the X
Series defibrillator. It is important that all users who are involved with configuring the device
read and understand all the information contained in this manual. The X Series Configuration
Manual has four chapters and one appendix.
Chapter 1—Introduction provides information on how to change all the configuration
settings on the X Series unit.
Chapter 2—Setup Menu provides a listing configuration settings that are located in the Setup
menu.
Chapter 3—Parameter Menus provides a listing configuration settings that are located in the
Parameter menus.
Chapter 4—Supervisor Menu provides a listing configuration settings that are located in the
Supervisor menu.
Appendix A—Contains the menu structure for the Setup, Parameter, and Supervisor menus.
Configuration Manual Updates
An issue or revision date for this manual is shown on the front cover. If more than three years
have elapsed since this date, contact ZOLL Medical Corporation to determine if additional
product information updates are available.
All users should carefully review each manual update to understand its significance and then
file it in its appropriate section within this manual for subsequent reference.
Product documentation is available through the ZOLL website at www.zoll.com. From the
Products menu, choose Product Manuals.