Yokogawa Standalone MW100 - Manual (Page 112)

App-10
IM MW100-17E
Appendix 4 Bit Structure of Status Information
The following status information is output upon request by the IS command.
Status Information 1 (Task Complete 1)
Bit Name Description
0 A/D conversion cmpltd 1 Set to 1 when A/D conversion on meas group 1 is
completed.
1 A/D conversion cmpltd 2 Set to 1 when A/D conversion on meas group 2 is
completed.
2 A/D conversion cmpltd 3 Set to 1 when A/D conversion on meas group 3 is
completed.
3 Media access cmpltd Set to 1 when saving of recorded data to ext media is
completed.
4 Report file creation cmpltd Set to 1 when saving of report data to ext media is
completed.
5 Manual sample file Set to 1 when saving of manual sample data to ext media
creation cmpltd is completed.
6 - -
7 - -
Status Information 2 (Task Complete 2)
Bit Name Description
0 Computation reset Set to 1 when the computation reset command (EX2) is
received, or the MATH_RESET action of the Event/Action
function occurs.
1 Reset MATH group 1 Set to 1 when the MATH_RST_GR1 action of the Event/
Action function occurs.
2 Reset MATH group 2 Set to 1 when the MATH_RST_GR2 action of the Event/
Action function occurs.
3 Reset MATH group 3 Set to 1 when the MATH_RST_GR3 action of the Event/
Action function occurs.
4 Reset MATH group 4 Set to 1 when the MATH_RST_GR4 action of the Event/
Action function occurs.
5 Reset MATH group 5 Set to 1 when the MATH_RST_GR5 action of the Event/
Action function occurs.
6 Reset MATH group 6 Set to 1 when the MATH_RST_GR6 action of the Event/
Action function occurs.
7 Reset MATH group 7 Set to 1 when the MATH_RST_GR7 action of the Event/
Action function occurs.
Status Information 3 (Abnormality)
Bit Name Description
1 Decimal place/units Set to 1 when the decimal place or units are changed.
change
2 Computation omitted Set to 1 when timing of the MATH channel processing
failed.
3 - -
4 - -
5 - -
6 - -
7 - -