Yokogawa Standalone MW100 - Manual (Page 116)

App-14
IM MW100-17E
con Output Connection Information
Function Outputs a list of devices connected to the MW100.
Setting con
Example con
EA
Active Connections
ProtoLocal Address Foreign Address State
TCP 10.0.233.126 : 3431710.0.232.194 : 1382 ESTABLISHED
TCP 0.0.0.0:34317 0.0.0.0:0 LISTEN
TCP 0.0.0.0:502 0.0.0.0:0 LISTEN
TCP 0.0.0.0:80 0.0.0.0:0 LISTEN
TCP 0.0.0.0:34318 0.0.0.0:0 LISTEN
TCP 0.0.0.0:34316 0.0.0.0:0 LISTEN
TCP 0.0.0.0:123 0.0.0.0:0 LISTEN
TCP 0.0.0.0:34323 0.0.0.0:0 LISTEN
EN
Explanation Outputs a list of connections in a form enclosed by EA and EN.
Proto: Protocol used
Local Address: Address and port number of the MW100
Foreign Address: Address and port number on the PC
State: Connection status
CLOSED No connection
LISTEN Waiting (SYN wait)
SYN_SENT SYN sent (SYN+ACK wait)
SYN_RCVD SYN received (wait for ACK to SYN)
ESTABLISHED Connection established
CLOSE_WAIT Close request (FIN wait)
FIN_WAIT_1 Close request wait-1 (FIN wait)
CLOSING Closing (waiting ACK to FIN)
LAST_ACK Remote close check waiting (ACK wait)
FIN_WAIT_2 Close request wait-2 (FIN wait)
TIME_WAIT Time wait
eth Output of Ethernet Information
Function Outputs statistics on packets flowing on the MW100 Ethernet interface.
Values output with this function are those that are accumulated starting
when the MW100 power is turned ON.
Setting eth
Example eth
EA
Ethernet Statistics
Name In Pkt In Err Out Pkt Out Err 16 Coll
sn0 917 1 51 0 0
lo0 0 0 0 0 0
EN
Appendix 6 Maintenance/Diagnostic Server