Output of operation logs (fl0, cmd), Output of operation logs (fl0, cmd) -35, App index output of operation logs (fl0, cmd) – Yokogawa Standalone MW100 User Manual
Page 85
2-35
IM MW100-17E
Response
1
2
3
App
App
Index
Output of Operation Logs (FL0, CMD)
• Output using the FL command.
• Operation logs are output. Up to 50 past logs are retained. If that number is exceeded,
old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_mmm...mCRLF
...................................................
ENCRLF
yy
Year (00 to 99)
mo
Month (01 to 12)
dd
Day (01 to 31)
hh
Hour (00 to 23)
mm
Minute (00 to 59)
ss
Seconds (00 to 59)
mmm...m Contents of operation (...)
MeasStart
Measurement start
MeasStop:
Measurement stop
MemStart:
Recording start
MemStop:
Recording stop
MathStart:
Computation start
MathStop:
Computation stop
MathReset:
Reset MATH values
MathClear:
Clear MATH values
AlarmAck:
Check alarm status
ManualSample: Perform manual sampling
ManualDivide: Divide manual sample file
Message0-5:
Write message 0 to 5
MemorySave:
Divide measurement/computation file
MemorySave_T: Divide thinned file
NewTime:
Time change
Clear0:
Initialize measurement (RC 0)
Clear1:
Initialize measurement (RC 1)
Construct:
Reconfigures the system
TimeReset1-6: Reset timers 1-6
BaranceReset: Initialize balance value
BaranceExec: Execute initial balancing
PowerOn:
Power ON
PowerOff:
Power OFF
_
Blank
Example
EA
99/05/11 12:20:30 PowerOn
99/05/11 12:20:31 PowerOff
EN
2.2 ASCII Output