Yokogawa Standalone MW100 User Manual
Page 143
Advertising
App-41
IM MW100-17E
Appendix
1
2
3
App
App
Index
When the IAP receives communications it needs to know where to route the information.
To send data to the SLC504 set protocol address to 0.
Message Destination Addresses
Address 0 communications need to be retransmitted over the serial port connected to the
SLC. Set Protocol to DF1 Full-Duplex and Serial Port to 2.
Message Destination Location
Appendix 9 Detailed Configuration of DigiOne IAP Serial Gateway
Advertising