Yokogawa Standalone MW100 - Manual (Page 137)

App-35
IM MW100-17E
Appendix
1
2
3
App App
Index
Enter the IP address and subnet mask that is desired.
Configuring IP Address of Digi One IAP
After configuring the network settings choose Skip and Next on the following two screens
and the configuration should be saved to the IAP. The web interface has a wizard that
can be used to configure the IAP for industrial networks. On the final screen of the setup
utility select Log On to the web user interface of device and click Finish.
The final screen of the setup utility
Appendix 9 Detailed Configuration of DigiOne IAP Serial Gateway