Yokogawa Standalone MW100 - Manual (Page 70)

2-20
IM MW100-17E
Mail Client Error Messages (cont.)
Error Code Description Corrective Action
EHELO HELO command com failed Check whether SMTP server is
functioning correctly.
EMAILFROM MAILFROM command com Check whether SMTP server is
failed correctly.
ERCPTTO RCPTTO command com failed Check whether SMTP server is
functioning correctly.
EDATA Data communication failed Check whether SMTP server is
functioning correctly.
ETCPIP Internal processing error Servicing required.
EINVAL Internal processing error Servicing required.
EPOP3HOSTNAME SMTP server name not correct Check whether destination server name
is set correctly.
EPOP3UNREACH POP3 server not found Check whether destination POP3 server
is running.
EPOP3TIMEOUT Communication with the POP3 Check cable connections and power of
server timed out. HUB.
EPOP3AUTH Authorization on POP3 server Check whether user name and server
failed name are allowed on server.
ESMTOAUTH SMTP Authentication failed Check whether user name and server
name are allowed on server.
EANOTSUPPORT Attempted to connect to a server Please change servers.
requesting an encoding algorithm
that is not supported by the MW100
Output of DHCP Client Logs (FL0, DHCP)
• Output using the FL command.
• DHCP information logs are output. Up to 50 past logs are retained. If that number is
exceeded, old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_kkk...k_mmm...mCRLF
.........................................
ENCRLF
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Seconds (00 to 59)
kkk...k Message type (15 characters)
mmm...m Message
_
Blank
Example
EA
99/05/11 12:20:30 link on
99/05/11 12:20:31 apply 192.168.1.1
EN
2.2 ASCII Output