Yokogawa Standalone MW100 - Manual (Page 132)

App-30
IM MW100-17E
I/O Messaging with RSLogix 5000
The first step in configuring an MW100 to communicate via I/O Messaging is to define
a connection within RSLinx. From the top menu under Communications, pick Configure
Drivers.
Configure Driver within RSLinx
The next step is to select Ethernet devices (not Ethernet/IP Driver) to support the MW100
and then pick Add New…
Ethernet devices driver for MW100
When prompted, name the driver – in this case MW100 was used but the name can be
changed to suit different naming conventions.
Path name for Ethernet Device
Appendix 8 Detailed Explicit and I/O Messaging using RSLogix