Yokogawa Standalone MW100 - Manual (Page 80)

2-30
IM MW100-17E
Output of Modbus Client Logs (FL0, MODBUS_C)
• Output using the FL command.
• Modbus client information logs are output.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_xxx_mmm...mCRLF
.........................................
ENCRLF
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Seconds (00 to 59)
xxx Command number (001 to 100, ---)
mmm...m Command status
(See “List of Character Codes Showing Modbus Master Command Statuses” on
page 2-25).
_ Blank
Example
EA
99/05/11 12:20:30 --- START
99/05/11 12:20:31 001 CONNECTING
99/05/11 12:20:32 001 VALID
EN
Output of Modbus Client Command Status (FL1, MODBUS_CC)
• Output using the FL command.
• Modbus client command status is output.
Syntax
EACRLF
SCAN = x, time = y msCRLF
xxx_mmm...mCRLF
.......................
ENCRLF
x Number of successfully executed commands (0 to 100)
y Time required to execute commands [ms] (0 to)
xxx Command number (001 to 100)
mmm...m Command status
(See “List of Character Codes Showing Modbus Master Command Statuses” on
page 2-25).
_ Blank
2.2 ASCII Output