Yokogawa Standalone MW100 - Manual (Page 77)

2-27
IM MW100-17E
Response
1
2
3
App App
Index
Output of Modbus Master Connection Status (FL1, MODBUS_MS)
• Output using the FL command.
• Modbus master connection status is output.
Syntax
EACRLF
xxx_mmm...mCRLF
.......................
ENCRLF
xxx Modbus slave address (001 to 247)
mmm...m Status of connection to Modbus slave
_
Blank
Example
EA
001 OPENED
002 FAILED
003 CLOSED
004 CLOSED
005 CLOSED
006 CLOSED
007 CLOSED
008 CLOSED
009 CLOSED
010 CLOSED
EN
List of Character Codes Showing Status of Connections with Modbus
Server/Slave
The table below also includes character codes that are only used by either the
Modbus master or Modbus slave.
Connection Status Meaning
FAILED Connection failed. Recovery wait status.
CLOSED Connection closed (connection not needed)
OPENED Connection opened (message could be transmitted)
RESOLVING Resolving the address
CONNECTING Requesting connection
CLOSING Closing connection
2.2 ASCII Output