Yokogawa Standalone MW100 - Manual (Page 59)

2-9
IM MW100-17E
Response
1
2
3
App App
Index
Output of Decimal Place and Units
• Output using the FE1 command.
Syntax
EACRLF
s_ccccuuuuuu,fppCRLF
..........................
ENCRLF
s Data status (N, D, S)
N : Normal
D : Differential input
S : Skip
_ Blank
cccc Channel numbers (001 to 060 or A001 to A300)
uuuuuu Unit information (output using 6 chars., left justified)
f Decimal place symbol (+/–)
pp Decimal place (00 to 04)
When f is (+)
When 00 , no decimal point is added (00000).
When 01 , the decimal point is added after the first digit (0000.0).
When 02 , the decimal point is added after the second digit
(000.00).
When 03 , the decimal point is added after the third digit (00.000).
When 04 , the decimal point is added after the fourth digit
(0.0000).
When f is (-)
When 01, the value is multiplied by 10.
Example
EA
N 001 mV ,+03
N 002 mV ,+03
N 003 mV ,+03
N 004 mV ,+03
N 005 mV ,+03
N 006 mV ,+03
N 007 mV ,+03
N 008 mV ,+03
N 008 mV ,+03
N 010 mV ,+03
EN
2.2 ASCII Output