Yokogawa Standalone MW100 - Manual (Page 47)

1-40 IM MW100-17E
RS Reconfiguration
Setting RSp1<terminator>
p1 System reconfiguration (0)
Example Perform system reconfiguration (re-detect the modules).
RS0
MF Media Preparations
Setting MFp1<terminator>
p1 Media initialization (0)
Example Initialize external media (CF card).
MF0
BL Execution of Strain Input Initial
Balancing
Setting BLp1<terminator>
p1 Operation
0
Reset initial balance value
1 Execute initial balancing
Example Executes initial balancing.
BL1
Explanation Valid only for channels on strain input modules on which
initial balancing is enabled (ON) with the BA command.
PV Transmission Output Control
Setting PVp1,p2<terminator>
p1 Channel range (001 to 060)
p2 Transmission output OFF/ON
OFF No transmission output
ON
Perform transmission output
Example Turn OFF transmission output on channels 1-8.
PV001-008,OFF
Explanation Valid only for channels whose output method is set to
transmission output (TRANS) with the AO command.
SP User Output Settings
Setting SPp1,p2<terminator>
p1 Channel range (001 to 060)
p2 User output value (within the output
range’s upper and lower limits of span)
Example Sets the user output value on channel 1 to 3 V.
SP001,3000
Explanation • Set the output range using the AO command.
• Valid only for channels whose output method is set
to arbitrary output (COM) with the AO command.
• Enter setting parameters for p2 excluding the
decimal place.
EC Execution of Communication
Setting ECp1<terminator>
p1 Operation
0
Gets the time (queries the time
on the SNTP server)
1.7 Control Commands/1.8 Output Commands
Example Get the time.
EC0
Explanation Valid if the SNTP client function is ON.
TC Communication Test
Setting TCp1<terminator>
p1 Operation
FTP_C
FTP client test
SMTP SMTP client test
p2 Connection (1, 2)
Example Execute the FTP client test.
TCFTP_C,1
Explanation • The FTP client test is valid if the FTP client function
is ON.
• The SMTP client test is valid if the SMTP client
function is ON.
CC Communication Open/Close
Setting When p1=0
CCp1<terminator>
When p1=1
CCp1,p2,p3<terminator>
When Closing the Connection
Setting CCp1<terminator>
p1 Closes the connection (0)
Example Close the connection.
CC0
When Opening the Connection
Setting CCp1,p2,p3<terminator>
p1 Opens the connection (1)
p2 User name (up to 16 characters)
p3 Password (max 8 characters)
Example Try to open a connection using user name "ABC" and
password "123456."
CC1,ABC,123456
Explanation • For the characters that can be used for user names,
see user specified characters in section 1.3.
• For the characters that can be used for passwords,
see password strings in section 1.3.
BO Byte Output Order Settings
Setting BOp1<terminator>
p1 Byte output order
0
Outputs in order from MSB (most
significant byte)
1 Outputs in order from LSB (least
significant byte)
Query BO?
Example Output from the top byte.
BO0
Explanation This command operates per the byte order of the
numerical data during BINARY output.