Yokogawa Standalone MW100 - Manual (Page 133)

App-31
IM MW100-17E
Appendix
1
2
3
App App
Index
After the driver is named, enter the IP address of an MW100 and click OK to continue.
Configuring IP Address of MW100 within RSLinx
When properly configured there should be a new listing in RSLinx for MW100. Note that
when browsing the connection, RSLinx indicates the node is found.
RSLinx with MW100 added
Open RSLogix 5000 and select the PLC that is going to communicate with the MW100.
Right click on Ethernet and select New Module...
Adding a New Module to an RSLogix 5000 Project
Appendix 8 Detailed Explicit and I/O Messaging using RSLogix