Yokogawa Standalone MW100 - Manual (Page 145)

App-43
IM MW100-17E
Appendix
1
2
3
App App
Index
The next step is to tell the IAP where the MW100 is located and how to talk to it.
Select Send messages to network device at Hostname – IP Address of MW100. Select
EtherNet/IP for the Protocol and then Next.
Message Destination Location
When the Message Destination Protocol Settings screen shows up, ensure that Forward
Open Connection Path: is left blank.
Message Destination Protocol Settings
Appendix 9 Detailed Configuration of DigiOne IAP Serial Gateway