Yokogawa Standalone MW100 - Manual (Page 76)

2-26
IM MW100-17E
Output of Modbus Master Command Status (FL1, MODBUS_MC)
• Output using the FL command.
• Modbus master information command status is output.
Syntax
EACRLF
SCAN = x, time = y msCRLF
xxx_mmm...mCRLF
.......................
ENCRLF
x Number of successfully executed commands (0 to 100)
y Time required to execute commands [ms] (0 to)
xxx Command number (001 to 100)
mmm...m Command status
(See “List of Character Codes Showing Modbus Master Command Statuses” on
page 2-25).
_ Blank
Example
EA
scan = 100, time = 10 ms
001 NO_DATA
002 VALID
003 SKIP
004 SKIP
005 SKIP
006 SKIP
007 SKIP
008 SKIP
009 SKIP
010 SKIP
EN
2.2 ASCII Output