Yokogawa Standalone MW100 - Manual (Page 61)

2-11
IM MW100-17E
Response
1
2
3
App App
Index
Data Acquisition Message Types
Status Message Description
Power on
off
Power ON
Power OFF
Card in
out
Code
CF card inserted
CF card ejected
CF card error detected
Format Ok
Code
CF card formatted successfully
CF card formatting concluded abnormally
Record start i
stop i
request
Record start (i=1, 2, 3, M, T: file number)
Record stop (i=1, 2, 3, M, T: file number)
Record request accepted (recording conditions not valid)
Mode rotate -#-
fullstop -#-
single -#-
ROTATE recording operation (#=D, T: DIRECT, TRIGGER)
FULLSTOP recording operation (#=D, T: DIRECT,
TRIGGER)
SINGLE recording operation (#=D, T: DIRECT, TRIGGER)
(rec. interval)
Number of ch
Recording
operation
File size
Recording interval, recording operation, (recording
data length/number of writing divisions)
Recording channels, file size
Create ALARMLG
RECORDLG
Folder name
File name
Alarm log file creation
Recording log file creation
Create folder (folder name, /DATAxxxx)
Create measurement, computation, thinned file (file
name: MDDIxxxx)
Create manual sample file (file name: MDDSxxxx)
Create report file (file name: DYYMMDDx (daily report),
WYYMMDDx (weekly report), MYYMMDDx (monthly
report))
Trigger exec i Record start through trigger output (i=1, 2, 3, M: file
number)
Delete (--)
File name
File deletion (for ROTATE)
File deletion (file name, MDDIxxxx)
Recover done i
none i
error i
Add remaining data (i=1, 2, 3, M, T: file number)
Do not add remaining data (i=1, 2, 3, M, T: file number)
Failed to add remaining data (i=1, 2, 3, M, T: file number)
Error Error number Error occurrence
Code Code File System Error Code
Time collect Time adjustment
Save exec i Recording division (i=1, 2, 3, M, or T: file number)
File numbers
1, 2, 3: Measurement groups 1 to 3
M: Computation
T: Thinning
S: Manual sample
R: Report (with the /M3 report function option)
File size display
Under 1 KB: ****bytes
1 to 10 KB: *.*KB
10 KB or more: *****KB
Period after Time
Period added: time of request, time request accepted
No period: time of request, time operation completed
Example
EA
05/04/01 12:20:00 Power on
05/04/01 12:30:00 Card in
05/04/01 12:30:00.Record start 1
EN
2.2 ASCII Output