Yokogawa Standalone MW100 - Manual (Page 4)

iii IM MW100-17E
How to Use This Manual
Structure of the Manual
This user’s manual contains the following chapters.
Chapter 1 Commands
Explains all available commands, one-by-one.
Chapter 2 Responses
Describes the format of settings and measured or computed data output by this
instrument.
Appendix
Provides serial interface specifications, a table of ASCII character codes, and other
information.
Index
An alphabetical index of this manual.
Symbols Used in This Manual
Unit
• k: Denotes 1000. Example: 5 kg, 100 kHz
• K: Denotes 1024. Example: 10 KB
Safety Markings
The following safety markings are used in this manual.
Refer to corresponding location on the instrument. This symbol
appears on dangerous locations on the instrument which require
special instructions for proper handling or use. The same symbol
appears in the corresponding place in the manual to identify those
instructions.
WARNING Calls attention to actions or conditions that could cause serious injury
or death to the user, and precautions that can be taken to prevent
such occurrences.
CAUTION Calls attentions to actions or conditions that could cause light injury to
the user or damage to the instrument or user’s data, and precautions
that can be taken to prevent such occurrences.
Note Calls attention to information that is important for proper operation of
the instrument.