Document Outline

• Safety Precautions
• Conventions Used in This Manual
• Contents
• Chapter 1 Explanation of Functions
  • 1.1 System Overview
    • MW100 Data Acquisition Unit
    • System Configuration
    • Main Module
    • Input/Output Modules
    • Base Plate
    • PC Software
  • 1.2 MW100 Operation Guide
  • 1.3 Functions of the Main Module
    • Names and Functions of Parts
    • Switches and Keys
    • Connectors
    • Displays
    • Operation Modes and Statuses
    • Measurement
    • Multi interval
    • Filters
    • MATH
    • MATH (/M1 Option)
    • Report Function (/M3 Option)
    • Remote RJC (RRJC)
    • Burnout
    • Range Over
    • Alarms
    • Tag Strings
    • Messages
    • Free Message
    • Event Action Function
    • Daylight Saving Time
    • Timer
    • Match Time
    • Measurement, Computation, and Thinning Recording Operations
    • Manual Sample Function
    • Saving Data to the CF Card
    • Communication Specifications
    • E-Mail Function
    • Log Information
  • 1.4 Functions of the 4-CH, High-Speed Universal Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
  • 1.5 Functions of the 10-CH, Medium-Speed Universal Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
  • 1.6 Functions of the 30-CH, Medium-Speed DCV/TC/DI Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
  • 1.7 Functions of the 6-CH, Medium-Speed Four-Wire RTD Resistance Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
  • 1.8 Functions of the 4-CH, Medium-Speed Strain Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Initial Balancing (Unbalance Adjustment)
    • Scaling Settings of the Strain Gauge Type Sensor
  • 1.9 Functions of the 10-CH, Pulse Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval
    • Input Range
    • Input Threshold Level
    • Filter
    • Integration
  • 1.10 Functions of the 10-CH, High-Speed Digital Input Module
    • Measurement Input Types
    • Measurement Range
    • Measurement Interval
    • Filters
  • 1.11 Functions of the 8-CH, Medium-Speed Analog Output Module
    • Output Types
    • Output Method
    • Output Range
    • Output Update Interval
    • Operation upon Startup and Errors
    • Output Operation during Calibration
  • 1.12 Functions of the 8-CH, Medium-Speed PWM Output Module
    • Output Types
    • Output Method
    • Output Range and Output Waveform
    • Pulse Interval
    • Output Update Interval
    • Operation upon Startup and Error Occurrence
  • 1.13 Operation of the 8-CH Medium-Speed Analog Output Module and the 8-CH Medium Speed PWM Output Module
    • Output upon Startup, Error Occurrence, and Stopping*
    • Output Format
    • Output on Disabled Channels
    • Output Operation per Settings and Setting Changes
    • Steady Output Operation
    • Output Operation during an Abnormality and after Recovery from the Abnormality
  • 1.14 Functions of the 10-CH, Medium-Speed Digital Output Module
    • Output Types
    • Output Update Interval
    • Relay Excitation State / Hold Operation
    • Relay Operation
    • Reflash Function
    • Preset Output upon Error (Firmware version R3.03 or later)
    • Preset Output upon Stop (Firmware version R3.03 or later)
  • 1.15 MATH Function (/M1 Option)
    • Overview of the MATH Function
    • Number of MATH Channels
    • MATH Types
    • Reference channel
    • Computation Operation
    • Math Interval
    • Rolling Average
    • Math Span
    • Handling Units in Computations
    • Alarm Level
    • Pulse Integration (TLOG.PSUM)
    • Processing Computed Results with Abnormal Input Values or Overflow Values
  • 1.16 Report Function (/M3 Option)
    • Starting and Stopping the Report Function
    • Resetting the Average, Maximum, Minimum, and Integral Values
    • Report Measurement Interval
    • Sum Scale of the Integral Value
    • Operation during Power Failure
    • Displaying Report Files
    • Processing Reports with Abnormal Input Values or Overflow Values
• Chapter 2 Installation and Wiring
  • 2.1 Handling Precautions
  • 2.2 Installation
    • Installation Location
    • Installation Procedures
  • 2.3 Attaching the Modules
    • Preparing the Base Plate
    • Attachment Procedure
    • Attachment Positions and Channel Numbers
  • 2.4 Connecting Signal Wires
    • Terminal Arrangement Markings on the Terminal Cover
    • Attaching and Removing the Terminal Block
    • Attaching the Plate with Screw Terminal and Plate with Clamp Terminals for Current
    • Screw Terminal Block
    • General Precautions When Wiring the Input/Output Signal Wires
    • Wiring Procedures
    • Wiring the Universal Input Module and DCV/TC/DI Input Module
    • Wiring the 4-Wire RTD Resistance Input Module
    • Wiring the Strain Input Module
    • Wiring the Pulse Input Module and Digital Input Module
    • Wiring with the Analog Output Module
    • Wiring with the PWM Output Module
    • Wiring with the Digital Output Module
  • 2.5 Connecting the Power Supply and Turning the Power Switch ON and OFF
    • Connections with the Power Cord (Power Supply and Power Cord Suffix Code -1c*)
    • Wiring the Power Supply Terminal (Power Supply and Power Cord Suffix Code -1W)
    • Wiring the Power Supply Terminal (When the Suffix Code of the Power Supply/Cord Is -2c* or -3W)
    • Turning the Power Switch ON and OFF
  • 2.6 Connecting the Ethernet Cable
    • Connection Procedure
    • Checking the Communication Status
    • Changing the Data Rate
    • Initializing Settings
  • 2.7 Connecting the RS-422A/485 Interface (/C3 Option)
    • Terminal Wiring and Signal Names
    • Connection Procedure
  • 2.8 Connecting the RS-232 Interface (/C2 Option)
    • Connector Pin Assignments and Signal Names
    • Handshaking
  • 2.9 Measures Against Noise on the MW100 Data Acquisition Unit
    • Integrating A/D Converter
    • First-Order Lag Filter
  • 2.10 Handling of the CF Card
    • Handling Precautions of the CF Card
    • Inserting the CF Card
    • Ejecting the CF Card
• Chapter 3 Setting and Data acquisition
  • 3.1 Connection Environment
    • PC System Requirements
    • Browser
    • Installing Java
    • MW100 Operation Screens
    • Host Name Display
    • Switching Modes
  • 3.2 Communication Settings
    • Ethernet Connection
    • Connecting with Serial Communication (Optional)
    • Modbus/RTU Settings
    • Modbus/TCP Settings
    • Login Function and User Settings
  • 3.3 System Settings
    • System Reconstruction
    • Setting the Date and Time
    • Viewing and Initializing the System Information
    • Formatting the CF Card and Checking the Free Space
    • Daylight Saving Time Setting
    • Other Settings
    • Status Information and Processing/Operation
  • 3.4 Setting Acquisition Conditions for Measured/Computed Data
    • Measurement Operation Settings
    • Computation Operation Settings
    • Measurement/Computation Recording Operation Settings
    • Thinning Operation Settings
    • Recording Channel Settings
    • Data Save Folder Settings
  • 3.5 Setting Measurement Conditions (Measurement Channel Settings)
    • Measurement Channel Settings
    • Global Channel Settings
    • Scale Input Methods
    • Filter, Thermocouple, and Chattering Filter Settings
    • Setting Up and Executing Strain Input Initial Balancing
  • 3.6 MATH Settings (MATH Channel Settings and the /M1 Option)
    • Entering Expressions
    • Global Expression Setting
    • Setting MATH Constants
    • Setting MATH Groups
    • Program Channel Settings
    • Rolling Average Settings
    • Communication Input Data Settings
  • 3.7 Setting Alarms
    • Alarm Setting (AI/DI)
    • Alarm Setting (MATH)
    • Delay Alarm Setting
  • 3.8 Digital Output Settings
    • Relay Settings
  • 3.9 Analog/PWM Output Settings
    • Output Range Settings (Analog Output)
    • Output Range Settings (PWM Output)
    • Global Channel Settings
    • Output Operation Settings
    • Transmission Output Control
  • 3.10 Event/Action Settings
  • 3.11 Timer and Match Time Settings
    • Timer Settings
    • Setting the Match Time
  • 3.12 Report Settings (/M3 Option)
    • Report Operation Settings 1
    • Report Operation Settings 2
  • 3.13 Starting and Stopping Measurement, Computation, and Recording
    • Starting and Stopping Measurement
    • Starting and Stopping Computation
    • Starting and Stopping Recording
    • Checking the Operating Status of the MW100 Using the Status Indicators
  • 3.14 Network Utility Settings
    • DNS Client Settings
    • FTP Client Settings
    • Mail Client Settings
    • Time Synchronization Client Settings
    • Server Settings
  • 3.15 Saving and Loading Setup Data
    • Saving and Loading Setup Data
    • Setup Data Save Conditions
  • 3.16 Measured Data Monitor Display/Settings
    • Monitor-Display of Measured Data
    • Explanation of Display Items
    • Display Settings
    • Log Information
    • Setting List (Firmware version R3.03 or later)
• Chapter 4 Troubleshooting and Maintenance
  • 4.1 Error Display on the 7-Segment LED and Corrective Actions
    • Errors upon Startup
    • System Errors
    • Module Errors
    • Communication Errors
    • Settings Errors
    • Execution Errors
    • Execution Errors
    • Communication Command Errors
    • Communication Errors
    • System Errors
  • 4.2 Error Display in the Monitor Screen and Corrective Actions
  • 4.3 Troubleshooting
  • 4.4 Calibration
    • Range Calibration for DC Voltage, RTD, Resistance, Strain, and Analog Output
    • Calibration of Temperature Measurements using Thermocouples
  • 4.5 Parts and Maintenance
  • 4.6 System Initialization
    • Initialization Type
    • Initialization Procedure
  • 4.7 Updating the System
    • Update Preparation
    • Updating Operation
    • Update Confirmation
    • Restoring the Settings
• Chapter 5 Specification
  • 5.1 Common Specifications
    • Normal Operating Conditions
    • Transport and Storage Conditions
    • Mechanical Specifications (Excluding AC Adapter)
    • Standards Compliance
  • 5.2 Main Module (MW100-E) Specifications
    • Measurement
    • MATH
    • MATH Function Specifications (/M1 Option)
    • RJC
    • Remote RJC (RRJC)
    • Alarms
    • Report Function Specifications (/M3 Option)
    • Recorder Structure
    • Display
    • Communication
    • Modbus Protocol Specifications
    • EtherNet/IP Server Function (Firmware version R3.02 or later)
    • Event Action
    • Timer and Match Time
    • User Interface
    • Other Functions
    • General Specifications
    • External Dimensions
  • 5.3 Base Plate (MX150) Specifications
    • External Dimensions
    • Attaching the MW100 Main Module
  • 5.4 4-CH, High-Speed Universal Input Module (MX110-UNV-H04) Specifications
    • Effects of Operating Conditions
    • General Specifications
    • External Dimensions
  • 5.5 10-CH, Medium-Speed Universal Input Module (MX110-UNV-M10) Specifications
    • Effects of Operating Conditions
    • General Specifications
    • External Dimensions
  • 5.6 30-CH, Medium-Speed DCV/TC/DI Input Module (MX110-VTD-L30) Specifications
    • Effects of Operating Conditions
    • General Specifications
    • External Dimensions
  • 5.7 6-CH, Medium-Speed Four-Wire RTD Resistance Input Module (MX110-V4R-M06) Specifications
    • Effects of Operating Conditions
    • General Specifications
    • External Dimensions
  • 5.8 4-CH, Medium-Speed Strain Input Module (MX112) Specifications
    • Effects of Operating Conditions
    • General Specifications
    • External Dimensions
  • 5.9 10-CH, Pulse Input Module (MX114) Specifications
    • General Specifications
    • External Dimensions
  • 5.10 10-CH, High-Speed Digital Input Module (MX115) Specifications
    • General Specifications
    • External Dimensions
  • 5.11 8-CH, Medium-Speed Analog Output Module (MX120-VAO-M08) Specifications
    • General Specifications
    • External Dimensions
    • Output Span Setting
    • Handling Abnormal Data
  • 5.12 8-CH, Medium-Speed PWM Output Module (MX120-PWM-M08) Specifications
    • General Specifications
    • External Dimensions
    • Handling Abnormal Data
  • 5.13 Operations Common to the 8-CH Medium-Speed Analog Output Module and the 8-CH Medium Speed PWM Output Module (MX120)
    • Settings Related Specifications (by Module)
    • Overview of Output Operation When Setting Holding of Previous Value of Transmission Output
  • 5.14 10-CH, Medium-Speed Digital Output Module (MX125) Specifications
    • General Specifications
    • External Dimensions
• Appendix
  • Appendix 1 Supported Characters
  • Appendix 2 Setting Data Communication That Uses Modbus Protocol
    • Setup Procedure
    • Example System
    • Setup Example
    • Client/Server Settings for READ
    • Client/Server Settings for WRITE
    • Starting Communication
    • Checking the Communication Status
    • Register Data Types
  • Appendix 3 Using the Event Action
    • Saving Data on the Hour
    • Acquiring Periodic Data
    • Diving the Data on Each Event
  • Appendix 4 E-Mail Format
    • Alarm Notification E-mail Format
    • Report Notification E-mail Format (/M3 option)
    • File Creation Notification E-mail Format
    • Media Remaining Space Notification E-mail Format
    • Power ON Notification E-mail Format
    • System Error Notification E-mail Format
    • Periodic Report Notification E-mail Format
    • Test E-mail Format
  • Appendix 5 Retrieving Files Using WebDAV
    • File Operation
    • Connection Using a Browser
  • Appendix 6 Network Terminology
  • Appendix 7 Using the Broken Line Data of Decimal Values
  • Appendix 8 Saving Data to the CF Card
    • Write Timing
    • Replacing the CF Card While Recording
    • Write Count
• Index