Document Outline

• SAFETY INSTRUCTIONS
  • Safety Symbols
  • Safety Guidelines
  • Power cord for the United Kingdom
• GETTING STARTED
  • GBS-1000 Series Overview
    • Series lineup
    • Main Features
    • Package Contents
  • Appearance
    • GBS-1074/1104/1204 Front Panel
    • Rear Panel
    • Display
  • Set Up
    • Tilt stand
    • Power up
    • First Time Use
• QUICK REFERENCE
  • Menu Tree / Operation Shortcuts
    • Convention
    • Acquire key
    • Auto Set key
    • Auto test/Stop key
    • CH1 ~ 4 key
    • Cursor key
    • Display key
    • Hardcopy key
    • Help key
    • Horizontal menu key
    • Math key (1/2)
    • Math key (2/2)
    • Measure key (1/2)
    • Measure key (2/2)
    • Program key (1/2)
    • Program key (2/2)
    • Run/Stop key
    • Save/Recall key (1/10)
    • Save/Recall key (2/10)
    • Save/Recall key (3/10)
    • Save/Recall key (4/10)
    • Save/Recall key (5/10)
    • Save/Recall key (6/10)
    • Save/Recall key (7/10)
    • Save/Recall key (8/10)
    • Save/Recall key (9/10)
    • Save/Recall key (10/10)
    • Trigger key (1/5)
    • Trigger key (2/5)
    • Trigger key (3/5)
    • Trigger key (4/5)
    • Trigger key (5/5)
    • Utility key (1/11)
    • Utility key (2/11)
    • Utility key (3/11)
    • Utility key (4/11)
    • Utility key (5/11)
    • Utility key (6/11)
    • Utility key (7/11)
    • Utility key (8/11)
    • Utility key (9/11)
    • Utility key (10/11)
    • Utility key (11/11)
  • Default Settings
  • Built-in Help
• MEASUREMENT
  • Basic Measurement
    • Channel activation
    • Auto Set
    • Run/Stop
    • Horizontal position/scale
    • Vertical position/scale
    • Probe compensation signal
  • Automatic Measurement
    • Measurement items
    • Individual mode
    • Display All mode
    • Gated Measurements
  • Cursor Measurement
    • Use horizontal cursor
    • Use vertical cursor
    • Toggle cursors on or off
  • Math Operation
    • Overview
    • Addition/Subtraction/Multiplication
    • FFT/FFT rms
  • Go-NoGo Test
    • Overview
    • Edit: Buzzer sound
    • Edit: NoGo when
    • Edit: Source signal
    • Edit: Continue or stop after NoGo
    • Edit: Template (boundary)
    • Run Go-NoGo test
  • Program
    • Overview
    • Edit program
    • Run program
  • Data Logging
    • Overview
    • Edit: Source
    • Edit: Setup Parameters
    • Run Data logging
• CONFIGURATION
  • Acquisition
    • Select acquisition mode
    • Select waveform memory length
    • Real time vs Equivalent time sampling mode
  • Display
    • Select waveform drawing (vector/dot)
    • Accumulate waveform
    • Set display contrast
    • Freeze the waveform (Run/Stop)
    • Select display grid
    • Turn Off menu
  • Horizontal View
    • Move waveform position horizontally
    • Select horizontal scale
    • Set the horizontal expansion mode
    • Select waveform update mode
    • Zoom waveform horizontally
    • Show waveform in X-Y mode
  • Vertical View (Channel)
    • Move waveform position vertically
    • Select vertical scale
    • Select coupling mode
    • Invert waveform vertically
    • Limit bandwidth
    • Select probe attenuation level
    • Set the vertical expansion mode
  • Trigger
    • Trigger type overview
    • Trigger parameter overview
    • Setup Holdoff and Auto level
    • Use edge trigger
    • Use video trigger
    • Use pulse width trigger
  • System Info / Language / Clock
    • View system information
    • Select menu language
    • Set date and time
• SAVE/RECALL
  • File Format/Utility
    • Display image file format
    • Waveform file format
    • Setup file format
    • USB flash drive file utility
  • Quick Save (HardCopy)
  • Save
    • File type/source/destination
    • Save panel setting
    • Save waveform
    • Save display image
    • Save All
  • Recall
    • File type/source/destination
    • Recall default panel setting
    • Recall reference waveform on the display
    • Recall panel setting
    • Recall waveform
• PRINT OUT
  • Overview
  • 1 Connect printer
  • 2 Configure interface
  • 3 Configure content
  • 4 Printout
• REMOTE CONTROL CONFIG
  • Interface Configuration
    • Configure USB interface
    • Configure RS-232C interface
    • USB/RS-232C remote control software
• MAINTENANCE
  • Vertical Resolution Calibration
  • Probe Compensation
• FAQ
  • I pressed the Power (On/Standby) key on the front panel but nothing happens.
  • I connected the signal but it does not appear on the display.
  • I want to remove the (Measurement result / FFT result / Help contents) from the display.
  • The waveform does not update (frozen).
  • The probe waveform is distorted.
  • Auto Set does not catch the signal well.
  • I want to clean up the cluttered panel settings.
  • The display image printout is too dark on the background.
  • The date and time settings are not correct.
  • USB does not work.
  • The accuracy does not match the specification.
• APPENDIX
  • Fuse Replacement
  • GBS-1000 Specifications
    • Model-specific
    • Common
  • Probe Specifications
    • GTP-070A-4
    • GTP-100A-4
    • GTP-250A-2
• INDEX