Martel Electronics BetaGauge 3II - Manual (Page 145)

Doc. Cal. Mode 7-4
Back Screen Level
You can access the Back Screen level via the Main
level only. From the Back Screen level, you can
perform the following functions:
 Access the Execute level (described below).
 Erase all the data recorded for a selected tag.
NOTE: The erase all data function is available
only if calibration reset is allowed in your
instrument maintenance software.
 Return to the Main level.
Execute Level
You can access the Execute level via the Back Screen
level only. From the Execute level, you can access the
following screens:
 Test Setup Screen. Allows you to ensure that you
have installed modules of the proper range and
type, as well as, ensure that installed modules have
not exceeded their calibration interval.
 Zero Screen. Allows you to zero the display
reading for the currently installed modules prior to
starting a test.
 Execute Screen. Allows you to execute the tests
defined by the tag. This screen shows which test
point is currently under calibration, as well as, live
displays of the module inputs.
 Post Test Status Screen. Allows you to view the
overall status of the tag, as well as, the date and
time of the calibration test performed. You can also
indicate whether the field instrument was adjusted
or replaced, and specify the technician’s
identification number.